An Initial Production Check (IPC) is performed on raw materials and first run product. Before mass production, Testcoo inspectors onsite will evaluate the first 10%-30% units produced to ensure compliance with necessary criteria, brand specifications, quality requirements which can firmly establish whether the manufacturer will be able to deliver on the promise to produce a quality product using the correct materials and manufacturing process, and orders shipping on time.

During Production Check (DUPRO) is an essential preventative measure taken in the early stages of production, which can mitigate costly mistakes in the long run by highlighting any problems before too many defective items are produced and avoid effecting the shipping schedule. Quality control inspectors of Testcoo usually perform on-site DUPRO inspections once a minimum of 30%, but no more than 50% of finished goods are produced to ensure consistent quality in the manufacturing process.

Final Random Inspection (FRI) also called Pre-Shipment Inspections (PSI), is reliable by most of the buys. FRI inspections act as a final check to evaluate product quality, packaging, product labeling and carton markings and ensure that items are correctly packed and fit for their intended use. The FRI takes place at the 100% production completed with a minimum of 80% of goods packed and seated in shipping cartons for verification of your purchase specifications.

The final but crucial step in the quality control process is properly preparing batches for shipping to destination markets. Loading Supervision (LS) is usually performed at the factory, forwarders warehouse, or port to verify count, confirm load, and seal the container. These inspections also ensure that the products are consistent with the packing list of the client, ensure the correct amount of different styles, sizes, and quantities, and that they are properly loaded to minimize the risk of damage during transit.

100% inspection also called full inspection conducted all productions have been completed. The much-needed product inspection is carried out to ensure that the final products are in accordance with the client’s quality standards.

Sample Picking Service (SPS) is performed when you pick shipment samples or testing samples allowing you to best assess whether the productions meet your quality needs and market standards. Testcoo ensures the samples are picked up from the mass production lot randomly to prevent samples “arranged” by the factory which can’t represent the mass production lot.

A virtual inspection also called remote inspection allows inspectors to guide factory staff remotely other than going to the factory by themselves through the steps of a product inspection, and collecting evidence of key findings on the product's quality and supply chain management. The main purpose of the virtual inspection was to review and verify the spec and package, witness the main testing and performance, the key points of the function and the allowed visual check during the virtual observation process.